Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) & CCIE Enterprise Infrastructure & CCIE Enterprise Wireless is one of the most valuable skills we can acquire at Cisco CCNP, pass 350-401 exams not only make us more comfortable with our career prospects, but they also keep our brains active and creative.
If we’re just getting started (or ready to start) 350-401, here are a few tips that might help us do more with less.
Using 350-401 dumps is the most efficient way to get through, you can download the latest updated 350-401 dumps here https://www.pass4itsure.com/350-401.html (Pass4itSure)
Think about why we want to pass the Cisco 350-401 exam
Our success depends largely on why we want to learn the Cisco 350-401 and how much time we spend doing it. If we want to successfully pass the 350-401 and get a higher treatment and sense of achievement than the average person, the updated Pass4itSure 350-401 dumps may be our choice.
Select the correct 350-401 dumps
The excellent Pass4itSure team will integrate the exam content according to the exam to come up with the exam questions that best suit us, so as to improve our exam ability.
Practice, and at the same time we can gain knowledge and a sense of accomplishment.
For example, learning by yourself is like an ant crawling, it passes vases, passes washstands, and along the way, it does see a lot of fragmentary scenery. With the help of 350-401 dumps learning, it is like an ant sitting on the back of a dragonfly. It also passes vases and washstands, but what you see is actually a different landscape. More importantly, it will also see more things, flowers, fountains, etc., with more possibilities.
Start small (and be patient enough)
Whichever learning method you choose, you should start following your dreams now (a very good place to start). Starting with downloading the 350-401 dumps and constantly starting to practice and think is the most effective way. If one learning method doesn’t work for you (e.g., books), try another before giving up, or even ask a professional institution for help.
Try to start practicing 350-401 exam questions (Pass4itSure 350-401 free dumps)
Question 1:
With IGMPv2, which multicast group address does the IGMP querier use to send query messages to all hosts on the LAN?
A. 239.0.0.2
B. 224.0.0.1
C. 239.0.0.1
D. 224.0.0.2
Correct Answer: B
Question 2:
Scenario The East-WLC-2504A controller has a problem. When configuration changes are made to the Employees- East-Wing AP Group that covers the East Wing, none of the APs receive the updates. Refer to the exhibits to determine where the problems are.
Note, not all menu items, text boxes, or radio buttons are active.
Which four changes must be made in the configuration of the East-WLC-2504A controller to restore functionality to the Employees-East-Wing AP Group? (Choose four.)
A. Change the AP in the Employees-East-Wing AP Group.
B. Change the IP Address in the east-wing interface.
C. Change the VLAN Identifier in the east-wing interface.
D. Enable Dynamic AP Management in the east-wing interface.
E. Change the Port Number to 2 in the east-wing interface.
F. Add the Primary Controller and IP address to the 3700-East-Wing AP.
G. Change the SSID in the Employees-East-Wing AP Group.
H. Enable the Employee’s SSID
Correct Answer: DFGH
References: http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/69639-wlc- failover.html
Question 3:
An engineer reviews a router\’s logs and discovers the following entry. What is the event\’s logging severity level?
Router# *Jan 01 38:24:04.401: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
A. notification
B. error
C. informational
D. warning
Correct Answer: B
Syslog levels are listed below:
Number 3 in %LINK-3-UPDOWN is the severity level of this message so in this case, it is an error.
Question 4:
Refer to the exhibit.
What are two reasons for IP SLA tracking failure? (Choose two )
A. The destination must be 172.30 30 2 for ICMP-echo
B. The threshold value is wrong
C. A route back to the R1 LAN network is missing in R2
D. The source interface is configured incorrectly.
E. The default route has the wrong next-hop IP address
Correct Answer: CD
Timeout (in milliseconds) sets the amount of time an IP SLAs operation waits for a response from its request packet. In other words, the timeout specifies how long the router should wait for a response to its ping before it is considered failed.
Threshold (in milliseconds too) sets the upper threshold value for calculating network monitoring statistics created by an IP SLAs operation. The threshold is used to activate a response to an IP SLA violation, e.g. send an SNMP trap or start a secondary SLA operation. In other words, the threshold value is only used to indicate over-threshold events, which do not affect reachability but may be used to evaluate the proper settings for the timeout command.
For reachability tracking, if the return code is OK or over the threshold, reachability is up; if not OK, reachability is down.
This tutorial can help you revise the IP SLA tracking topic:
http://www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/813-cisco-router-ipslabasic.html
Note: Maybe some of us will wonder why there are these two commands:
R1(config)#ip route 0.0.0.0 0.0.0.0 172.20.20.2 track 10
R1(config)#no ip route 0.0.0.0 0.0.0.0 172.20.20.2
In fact the two commands:
ip route 0.0.0.0 0.0.0.0 172.20.20.2 track 10
ip route 0.0.0.0 0.0.0.0 172.20.20.2
are different. These two static routes can co-exist in the routing table. Therefore if the tracking goes down, the first command will be removed but the second one still exists and the backup path is not preferred. So we have to remove the second one.
Question 5:
A. R1#aaa new-model aaa authorization exec default local enable aaa admin privilege 15
B. R1#username admin privilege 15 aaa authorization exec default local net conf-yang
C. R1#netconf-yang username admin privilege 15 secret cisco123 aaa new-model aaa authorization exec default local
D. R1#username admin privilege 15 aaa authorization exec default local
Correct Answer: C
Question 6:
Refer to the exhibit.
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point.
Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplishes this task?
A. R3(config)#route-map PREPEND permit 10 R3(config-route-map)#set as-path prepend 200 200 200 R3(config)#router bgp 200 R3#(config-router)#neighbor 10.1.1.1 route-map PREPEND out
B. R4(config)#route-map PREPEND permit 10 R4(config-route-map)#set as-path prepend 100 100 100 R4(config)#router bgp 200 R4(config-router)#neighbor 10.2.2.2 route-map PREPEND in
C. R4(config)#route-map PREPEND permit 10 R4(config-route-map)#set as-path prepend 200 200 200 R4(config)#router bgp 200 R4(config-router)#neighbor 10.2.2.2 route-map PREPEND out
D. R3(config)#route-map PREPEND permit 10 R3(config-route-map)#set as-path prepend 100 100 100 R3(config)#router bgp 200 R3(config-router)#neighbor 10.1.1.1 route-map PREPEND in
Correct Answer: A
R3 advertises BGP updates to R1 with multiple AS 100 so R3 believes the path to reach AS 200 via R3 is farther than R2 so R3 will choose R2 to forward traffic to AS 200.
Question 7:
Refer to the exhibit.
Object tracking has been configured for VRRP-enabled routers Edge-01 and Edge-02 Which commands cause Edge-02 to preempt Edge-01 in the event that interface G0/0 goes down on Edge-01?
A. Edge-01(config)#interface G0/1 Edge-01(config-if)#vrrp 10 track 10 decrement 30
B. Edge-02(config)#interface G0/1 Edge-02(config-if)#vrrp 10 track 10 decrement 30
C. Edge-02(config)#interface G0/1 Edge-02(config-if)#vrrp 10 track 10 decrement 10
D. Edge-01(config)#interface G0/1 Edge-01(config-if)#vrrp 10 track 10 decrement 10
Correct Answer: A
Question 8:
Which method provides failure detection in BFD?
A. short duration, high overhead
B. short duration, low overhead
C. long duration, high overhead
D. long duration, low overhead
Correct Answer: B
Question 9:
What is the advantage of utilizing data models in a multivendor environment?
A. lowering CPU load incurred to managed devices
B. improving communication security with binary encoded protocols
C. facilitating a unified approach to configuration and management
D. removing the distinction between configuration and runtime state data
Correct Answer: C
Question 10:
Refer to the exhibit. A network engineer applied a filter for LSA traffic on OSPFv3 interarea routes on the area 5 ABR to protect advertising the internal routes of area 5 to the business partner network. All other areas should receive the area 5 internal routes.
After the respective route filtering configuration is applied on the ABR, area 5 routes are not visible in any of the areas. How must the filter list be applied on the ABR to resolve this issue?
R2#sh ipv6 route ospf
O 2002:ABCD::/64 [110/1] via FastEthernet0/1, directly connected O 2004:BBAB::/64 [110/1] via FastEthernet0/0, directly connected O 2004:BBAC::/64 [110/1] via FastEthernet1/0, directly connected O 3010:2:4:0:15::/128 [110/1] via FE80::C804:1DFF:FB20:8, FastEthernet0/0
A. in the “out” direction for area 20 on router R2
B. in the “in” direction for area 5 on router R1
C. in the “out” direction for area 5 on router R1
D. in the “in” direction for area 20 on router R2
Correct Answer: A
Question 11:
Which two solutions are used for backing up a Cisco DNA Center Assurance database? (Choose two)
A. NFS share
B. local server
C. non-Linux server
D. remote server
E. bare metal server
Correct Answer: AD
Cisco DNA Center creates the backup files and posts them to a remote server. Each backup is uniquely stored using the UUID as the directory name. To support Assurance data backups, the server must be a Linux-based NFS server that meets the following requirements:
–
Support NFS v4 and NFS v3.
–
Cisco DNA Center stores backup copies of Assurance data on an external NFS device and automation data on an external remote sync (rsync) target location.
–
The remote share for backing up an Assurance database (NDP) must be an NFS share.
Question 12:
Which two methods are used by an AP that is typing to discover a wireless LAN controller? (Choose two.)
A. Cisco Discovery Protocol neighbor
B. broadcasting on the local subnet
C. DNS lookup cisco-DNA-PRIMARY.local domain
D. DHCP Option 43
E. querying other APs
Correct Answer: BD
Question 13:
Refer to the exhibit. How does the router handle traffic after the CoPP policy is configured on the router?
A. Traffic coming to R1 that does not match the access list SNMP is dropped.
B. Traffic coming to R1 that matches access-list SNMP is policed.
C. Traffic passing through R1 that matches access-list SNMP is policed.
D. Traffic generated by R1 that matches access-list SNMP is policed.
Correct Answer: D
Service Policy is in the output direction. So traffic generated by the router will be policed.
Question 14:
What is one benefit of adopting a data modeling language?
A. augmenting management process using vendor-centric actions around models
B. refactoring vendor and platform-specific configurations with widely compatible configurations
C. augmenting the use of management protocols like SNMP for status subscriptions
D. deploying machine-friendly codes to manage a high number of devices
Correct Answer: B
Question 15:
Which action limits the total amount of memory and CPU that is used by a collection of VMs?
A. Place the collection of VMs in a resource pool.
B. Place the collection of VMs in a vApp.
C. Limit the amount of memory and CPU that is available to the cluster.
D. Limit the amount of memory and CPU that is available to the individual VMs.
Correct Answer: A
Practice, and at the same time we can gain knowledge and a sense of accomplishment.
The above free exam questions and answers are shared for free from Pass4itSure, get the best exam materials, download 1061 latest 350-401 exam practice questions: https://www.pass4itsure.com/350-401.html, to help everyone pass the exam easily.
The above is a part of my suggestions for the 350-401 exam, I hope it can help you! I hope you can make up your mind and run hard toward your dreams!
